Confirm client idenity with an OIDC identity provider

12min
|
Vault
Boundary

Implementing zero-trust architecture requires providing identity-based access to services within an organization. OpenID Connect (OIDC) allows clients to confirm their identity through an identity provider. Vault 1.9.0 introduced the ability to configure Vault as an OIDC identity provider with authorization code flow.

In this tutorial, you will setup Vault as an OIDC provider. To demonstrate this feature, you will configure Boundary to leverage Vault as an identity provider and perform secure authentication.

Note

Boundary operates as a confidential OIDC client in this tutorial. To configure a public OIDC client, refer to the OIDC Provider documentation.

Prerequisites

To perform the tasks described in this tutorial, you need to have:

A Boundary environment. Refer to the Getting Started tutorial to install Boundary.
A Vault environment of version 1.10 or later. Refer to the Vault install guide to install Vault locally or create a Vault cluster on HCP.
Note
This feature was first introduced in Vault 1.9 as a Technical Preview feature. As of Vault 1.10, it is generally available.

Policy requirements

For the purpose of this tutorial, you will use root token to work with Vault running in development mode.

When you are working with non-development Vault environment, your token policy must include the following permissions:

# To create an entity and entity alias. Enable and configure Vault as an OIDC providerpath "identity/*" {  capabilities = [ "create", "read", "update", "delete", "list" ]}# To enable userpass auth methodpath "sys/auth/userpass" {  capabilities = [ "create", "read", "update", "delete" ]}# To create a new user, "end-user" for userpasspath "auth/userpass/users/*" {   capabilities = [ "create", "read", "update", "delete", "list" ]}

If you are not familiar with policies, complete the policies tutorial.

Lab setup

Start Vault

In another terminal, start a Vault dev server with root as the root token.

$ vault server -dev -dev-root-token-id root

The Vault dev server defaults to running at 127.0.0.1:8200. The server is initialized and unsealed.

Insecure operation

Do not run a Vault dev server in production. This approach starts a Vault server with an in-memory database and runs in an insecure way.

Open another terminal session, and export an environment variable for the vault CLI to address the Vault server.

$ export VAULT_ADDR=http://127.0.0.1:8200

Export an environment variable for the vault CLI to authenticate with the Vault server.

$ export VAULT_TOKEN=root

Note

For these tasks, you can use Vault's root token. However, it is recommended that root tokens are only used for enough initial setup or in emergencies. As a best practice, use an authentication method or token that meets the policy requirements.

The Vault server is ready.

Note

If you do not have access to an HCP Vault Dedicated cluster, visit the Create a Vault Cluster on HCP tutorial.

Launch the HCP Portal and login.
Click Vault in the left navigation pane.
In the Vault clusters pane, click vault-cluster.
Under Cluster URLs, click Public Cluster URL.
In a terminal, set the VAULT_ADDR environment variable to the copied address.
```
$ export VAULT_ADDR=<Public_Cluster_URL>
```
Return to the Overview page and click Generate token.
Within a few moments, a new token will be generated.
Copy the Admin Token.
Return to the terminal and set the VAULT_TOKEN environment variable.
```
$ export VAULT_TOKEN=<token>
```
Set the VAULT_NAMESPACE environment variable to admin.
```
$ export VAULT_NAMESPACE=admin
```
The admin namespace is the top-level namespace automatically created by HCP Vault. All CLI operations default to use the namespace defined in this environment variable.

Type vault status to verify your connectivity to the Vault cluster.

$ vault statusKey                      Value---                      -----Recovery Seal Type       shamirInitialized              trueSealed                   falseTotal Recovery Shares    1Threshold                1Version                  1.9.2+entStorage Type             raft...snipped...

The Vault Dedicated server is ready.

Configure Vault authentication

Vault auth methods authenticate, assign identity and policies to a client. When Vault acts as an OIDC provider, it is the source of identity and these auth methods verify that identity.

Enable the userpass auth method at the default path.
```
$ vault auth enable userpass
```

Create a policy granting the user read capabilities on the authorization endpoint.

vault policy write oidc-auth - << EOFpath "identity/oidc/provider/my-provider/authorize" {capabilities = [ "read" ]}EOF

Example expected output:

Success! Uploaded policy: oidc-auth

Create a user named end-user with the password password, and add the oidc-auth policy.
```
$ vault write auth/userpass/users/end-user \    password="password" \    token_policies="oidc-auth" \    token_ttl="1h"
```
Example expected output:
```
Success! Data written to: auth/userpass/users/end-user
```
This user authenticates with Vault and is assigned the default access policy along with the oidc-auth policy.
Learn More
For more information refer to the Userpass Auth Method documentation.

Create Vault identity entity and group

A client may have multiple accounts with various identity providers that are enabled on the Vault server. Vault clients can be mapped as entities and their corresponding accounts with authentication providers can be mapped as aliases.

Create an identity entity with details about the end-user.

$ vault write identity/entity \    name="end-user" \    metadata="email=vault@hashicorp.com" \    metadata="phone_number=123-456-7890" \    disabled=false

The end-user metadata contains their email address and phone number.

Create a variable named ENTITY_ID that stores the ID assigned to the entity.
```
$ ENTITY_ID=$(vault read -field=id identity/entity/name/end-user)
```

Create an identity group with the name engineering with end-user as a member.

$ vault write identity/group \    name="engineering" \    member_entity_ids="$ENTITY_ID"

Create a variable named GROUP_ID that stores the ID assigned to the group.
```
$ GROUP_ID=$(vault read -field=id identity/group/name/engineering)
```
The end-user entity is a member of the engineering group. An entity alias maps an entity to client of an authentication method. This mapping requires the entity ID and the authentication accessor ID.
Create a variable named USERPASS_ACCESSOR that stores the accessor value of the userpass authentication method.
```
$ USERPASS_ACCESSOR=$(vault auth list -detailed -format json | jq -r '.["userpass/"].accessor')
```

Create an entity alias that maps the end-user entity with the end-user userpass user.

$ vault write identity/entity-alias \    name="end-user" \    canonical_id="$ENTITY_ID" \    mount_accessor="$USERPASS_ACCESSOR"

The entity and the userpass user are aliases of one another.

Learn More

Explore identity in the entities and groups tutorial.

Create a Vault OIDC client

A Vault OIDC client connects a resource called an OIDC assignment, an encryption key, client callback URL and the time-to-live on verification together.

An OIDC assignment describes the list of the Vault entities and groups allowed to authenticate with this client.

Create an assignment named my-assignment that authorize the end-user entity and and engineering group.
```
$ vault write identity/oidc/assignment/my-assignment \    entity_ids="${ENTITY_ID}" \    group_ids="${GROUP_ID}"
```
The Vault OIDC authentication process requires an encryption key to sign and verify the JSON web tokens (JWT) that are produced by the authentication flow.

Create a key named my-key.

$ vault write identity/oidc/key/my-key \    allowed_client_ids="*" \    verification_ttl="2h" \    rotation_period="1h" \    algorithm="RS256"

The key is usable by all Vault OIDC clients as allowed_client_ids is set to *.

Create an OIDC client named boundary.
```
$ vault write identity/oidc/client/boundary \    redirect_uris="http://127.0.0.1:9200/v1/auth-methods/oidc:authenticate:callback" \    assignments="my-assignment" \    key="my-key" \    id_token_ttl="30m" \    access_token_ttl="1h"
```
The redirect_uris describe the callback URL for the client. The value http://127.0.0.1:9200/v1/auth-methods/oidc:authenticate:callback is the address of a Boundary service running on its default port. The assignments limits access the entities and groups defined in my-assignment. The id_token_ttl sets the expiration on the ID token to 30 minutes. The access_token_ttl sets the expiration of the Access token to 1 hour.
Create a variable named CLIENT_ID to store the client_id field of the boundary client.
```
$ CLIENT_ID=$(vault read -field=client_id identity/oidc/client/boundary)
```

Create a Vault OIDC provider

A Vault OIDC provider supports one or more clients and Vault OIDC scopes. These scopes define metadata claims expressed in a template. Claims are key-value pairs that contain information about a user and the OIDC service.

Create a variable named USER_SCOPE_TEMPLATE that stores the user scope template.

$ USER_SCOPE_TEMPLATE='{    "username": {{identity.entity.name}},    "contact": {        "email": {{identity.entity.metadata.email}},        "phone_number": {{identity.entity.metadata.phone_number}}    }}'

This template retrieves the email and phone_number from the metadata of an entity.

Define a Vault OIDC scope named user with the user scope template.

$ vault write identity/oidc/scope/user \    description="The user scope provides claims using Vault identity entity metadata" \    template="$(echo ${USER_SCOPE_TEMPLATE} | base64 -)"

Create a variable named GROUPS_SCOPE_TEMPLATE that stores the group scope template.
```
$ GROUPS_SCOPE_TEMPLATE='{    "groups": {{identity.entity.groups.names}}}'
```
This template retrieves the names of all the groups defined.

Define a Vault OIDC scope named groups with the groups scope template.

$ vault write identity/oidc/scope/groups \    description="The groups scope provides the groups claim using Vault group membership" \    template="$(echo ${GROUPS_SCOPE_TEMPLATE} | base64 -)"

The Vault OIDC provider requires a list of client IDs and scopes.

Create an Vault OIDC provider named my-provider.
$ vault write identity/oidc/provider/my-provider \ allowed_client_ids="${CLIENT_ID}" \ scopes_supported="groups,user"
Note
HCP Vault Dedicated uses the private address for the issuer URL. In that scenario, your application would need to exist within an environment that can access the private URL such as a peered AWS VPC. For this tutorial, you will override the issuer value to match the public URL.
$ vault write identity/oidc/provider/my-provider \ issuer="$(echo $VAULT_ADDR)" \ allowed_client_ids="${CLIENT_ID}" \ scopes_supported="groups,user"
The provider grants the boundary client access.

Display the Vault OIDC configuration endpoint.

$ curl -s $VAULT_ADDR/v1/identity/oidc/provider/my-provider/.well-known/openid-configuration | jq

$ curl --header "X-Vault-Token: $VAULT_TOKEN" --request GET \    --header "X-Vault-Namespace: $VAULT_NAMESPACE" \    $VAULT_ADDR/v1/identity/oidc/provider/my-provider/.well-known/openid-configuration | jq

Show Vault OIDC public keys.

$ curl -s $VAULT_ADDR/v1/identity/oidc/provider/my-provider/.well-known/keys | jq

Start Boundary

Boundary enables secure access to dynamic infrastructure. The development server brings up a fully functioning instance of Boundary. Refer to the Install Boundary tutorial if you are not familiar with installing Boundary.

In another terminal, start Boundary in development mode.

$ boundary dev==> Boundary server configuration:        [Controller] AEAD Key Bytes: CRVcb/JPLVZT1eTKzfL9D/LXJjveX99lpxp3NLQ7YDo=          [Recovery] AEAD Key Bytes: hmdKvtT3ygiYrC35okvPTbTNLX64EL5nH66gE3/na+E=       [Worker-Auth] AEAD Key Bytes: sNDhJIQy/9yR7AAGX3C8FN9aBjcCqFSZ+v+mTmIYetI=               [Recovery] AEAD Type: aes-gcm                   [Root] AEAD Type: aes-gcm            [Worker-Auth] AEAD Type: aes-gcm                                Cgo: disabled     Controller Public Cluster Addr: 127.0.0.1:9201             Dev Database Container: bold_curran                   Dev Database Url: postgres://postgres:password@localhost:55001/boundary?sslmode=disable         Generated Admin Login Name: admin           Generated Admin Password: password          Generated Host Catalog Id: hcst_1234567890                  Generated Host Id: hst_1234567890              Generated Host Set Id: hsst_1234567890      Generated Oidc Auth Method Id: amoidc_1234567890             Generated Org Scope Id: o_1234567890  Generated Password Auth Method Id: ampw_1234567890         Generated Project Scope Id: p_1234567890                Generated Target Id: ttcp_1234567890  Generated Unprivileged Login Name: user    Generated Unprivileged Password: password                         Listener 1: tcp (addr: "127.0.0.1:9200", cors_allowed_headers: "[]", cors_allowed_origins: "[*]", cors_enabled: "true", max_request_duration: "1m30s", purpose: "api")                         Listener 2: tcp (addr: "127.0.0.1:9201", max_request_duration: "1m30s", purpose: "cluster")                         Listener 3: tcp (addr: "127.0.0.1:9202", max_request_duration: "1m30s", purpose: "proxy")                          Log Level: info                              Mlock: supported: false, enabled: false                            Version: Boundary v0.6.2                        Version Sha: 07c5c00f557ccc6d58ac065fa6c267f576860ac2           Worker Public Proxy Addr: 127.0.0.1:9202...snip...

Switch back to the other terminal and authenticate with the Boundary as the admin user.

$ boundary authenticate password \    -auth-method-id ampw_1234567890 \    -login-name admin \    -password password

The Boundary server is ready.

Configure Boundary OIDC auth

Boundary supports authentication through OIDC.

Create a variable named ISSUER that stores the issuer field of the Vault OIDC provider named my-provider.

$ ISSUER=$(curl -s $VAULT_ADDR/v1/identity/oidc/provider/my-provider/.well-known/openid-configuration | jq -r .issuer)

$ ISSUER=$(curl --header "X-Vault-Token: $VAULT_TOKEN" --request GET \    --header "X-Vault-Namespace: $VAULT_NAMESPACE" \    $VAULT_ADDR/v1/identity/oidc/provider/my-provider/.well-known/openid-configuration | jq -r .issuer)

Create a variable named CLIENT_SECRET that stores the client_secret field of Vault OIDC client named boundary.
```
$ CLIENT_SECRET=$(vault read -field=client_secret identity/oidc/client/boundary)
```

Create a new oidc authentication method configured to use the Vault OIDC provider.

$ boundary auth-methods create oidc \    -issuer "${ISSUER}" \    -client-id "${CLIENT_ID}" \    -client-secret "${CLIENT_SECRET}" \    -signing-algorithm RS256 \    -api-url-prefix "http://127.0.0.1:9200" \    -claims-scopes "groups" \    -claims-scopes "user" \    -max-age 20 \    -name "Vault OIDC Provider"

Create a variable named AUTH_METHOD_ID that stores the ID of the authentication method.

$ AUTH_METHOD_ID="$(boundary auth-methods list -format json | jq -r '.items[] | select(.name == "Vault OIDC Provider") | .id')"

Change the state of the auth method to active-public.

$ boundary auth-methods change-state oidc \    -id "${AUTH_METHOD_ID}" \    -state active-public

Enable the auth method to operate in the global scope.

$ boundary scopes update \    -primary-auth-method-id "${AUTH_METHOD_ID}" \    -id global

Boundary OIDC authentication is configured and ready for the end-user to authenticate.

Authenticate with Boundary

Launch the Boundary UI at http://127.0.0.1:9200 to authenticate.
By default the Boundary UI places you in the Global scope.
Select Vault OIDC Provider.
Click Authenticate
Boundary redirects to the Vault authentication page in a new window.
Navigate to the Vault authentication window created by Boundary.
Pop-up Blocking
If you do not see the new window ensure that the browser has not blocked it.
Select Username from the Method drop-down list.
Enter end-user in the Username text field.
Enter password in the Password text field.
Click Sign In.

The authentication process completes and redirects back to Boundary.

Next steps

In this tutorial, you configured Vault as an OIDC provider with Boundary as a client. Learn more about configuring Vault as an OIDC provider by reading the documentation. Boundary is able to provide access to dynamic infrastructure.

To learn more about Boundary, visit Boundary Learn.

OIDC authentication with Okta

AppRole pull authentication