Set up a Nomad cluster on GCP

This tutorial will guide you through deploying a Nomad cluster with access control lists (ACLs) enabled on GCP. Consider checking out the cluster setup overview first as it covers the contents of the code repository used in this tutorial.

Prerequisites

For this tutorial, you need:

• Packer 1.9.4 or later
• Terraform 1.2.0 or later
• Nomad 1.7.7 or later
• gcloud CLI 474.0.0 or later
• A Google Cloud account configured for use with Terraform

Clone the code repository

The cluster setup code repository contains configuration files for creating a Nomad cluster on GCP. It uses Consul for the initial setup of the Nomad servers and clients and enables ACLs for both Consul and Nomad.

Clone the code repository.

$ git clone https://github.com/hashicorp-education/learn-nomad-cluster-setup

Navigate to the cloned repository folder.

$ cd learn-nomad-cluster-setup

Navigate to the gcp folder.

$ cd gcp

Create the Nomad cluster

There are two main steps to creating the cluster: building a Google Compute Engine image with Packer and provisioning the cluster infrastructure with Terraform. Both Packer and Terraform require that you configure variables before you run commands. The variables.hcl.example file contains the configuration you need for this tutorial.

Update the variables file for Packer

Rename variables.hcl.example to variables.hcl, and open it in your text editor.

$ mv variables.hcl.example variables.hcl

Configure the gcloud tool for use with Terraform and use the values from authenticating to GCP to update the project, region and zone variables. In this example, those are hc-3ff63253e6a54756b207e4d4727, us-east1, us-east1-b. The remaining variables are for Terraform ,and you update them after building the VM image.

# Packer variables (all are required)project = "hc-3ff63253e6a54756b207e4d4727"region = "us-east1"zone = "us-east1-b"# ...

Build the GCE image

Initialize Packer to download the required plugins.

$ packer init image.pkr.hcl

Then, build the image and provide the variables file with the -var-file flag.

$ packer build -var-file=variables.hcl image.pkr.hcl# ...Build 'googlecompute.hashistack' finished after 4 minutes 31 seconds.==> Wait completed after 4 minutes 31 seconds==> Builds finished. The artifacts of successful builds are:--> googlecompute.hashistack: A disk image was created: hashistack-20221121163551

Packer outputs the specific disk image ID once it finishes building the image. In this example, the value is hashistack-20221121163551.

Update the variables file for Terraform

Open variables.hcl in your text editor and update the machine_image variable with the value output from the Packer build. In this example, the value is hashistack-20221121163551.

# ...machine_image = "hashistack-20221121163551"# These variables will default to the values shown# and do not need to be updated unless you want to# change them# allowlist_ip            = "0.0.0.0/0"# name                    = "nomad"# server_instance_type    = "t2.micro"# server_count            = "3"# client_instance_type    = "t2.micro"# client_count            = "3"

The remaining variables in variables.hcl are optional.

•  allowlist_ip is a CIDR range specifying which IP addresses are allowed to access the Consul and Nomad UIs on ports 8500 and 4646 as well as SSH on port 22. The default value of 0.0.0.0/0 allows traffic from everywhere.
•  name is a prefix for naming the GCP resources.
•  server_instance_type and client_instance_type are the virtual machine instance types for the cluster server and client nodes, respectively.
•  server_count and client_count are the number of nodes to create for the servers and clients, respectively.

Deploy the Nomad cluster

Initialize Terraform to download required plugins and set up the workspace.

$ terraform initInitializing the backend...# ...Initializing provider plugins...# ...Terraform has been successfully initialized!# ...

Run the Terraform deployment and provide the variables file with the -var-file flag. Respond yes to the prompt to confirm the operation. The provisioning takes several minutes. The Consul and Nomad web interfaces are available upon completion.

$ terraform apply -var-file=variables.hcl# ...Plan: 11 to add, 0 to change, 0 to destroy.# ...Do you want to perform these actions?  Terraform will perform the actions described above.  Only 'yes' will be accepted to approve.  Enter a value: Yes# ...Apply complete! Resources: 11 added, 0 changed, 0 destroyed.Outputs:IP_Addresses = <<EOTClient public IPs: 52.91.50.99, 18.212.78.29, 3.93.189.88Server public IPs: 107.21.138.240, 54.224.82.187, 3.87.112.200The Consul UI can be accessed at http://107.21.138.240:8500/uiwith the bootstrap token: dbd4d67b-4629-975c-e9a8-ff1a38ed1520EOTconsul_bootstrap_token_secret = "dbd4d67b-4629-975c-e9a8-ff1a38ed1520"lb_address_consul_nomad = "http://107.21.138.240"

Verify the services are in a healthy state. Navigate to the Consul UI in your web browser with the URL in the Terraform output.

Click on the Log in button and use the bootstrap token secret consul_bootstrap_token_secret from the Terraform output to log in.

Click on the Nodes page from the sidebar navigation. There are six healthy nodes, including three Consul servers and three Consul clients created with Terraform.

Set up access to Nomad

Run the post-setup.sh script.

$ ./post-setup.shThe Nomad user token has been saved locally to nomad.token and deleted from the Consul KV store.Set the following environment variables to access your Nomad cluster with the user token created during setup:export NOMAD_ADDR=$(terraform output -raw lb_address_consul_nomad):4646export NOMAD_TOKEN=$(cat nomad.token)The Nomad UI can be accessed at http://107.21.138.240:4646/uiwith the bootstrap token: 22444f72-c222-bd26-6c2c-584fb9e5b698

Apply the export commands from the output.

$ export NOMAD_ADDR=$(terraform output -raw lb_address_consul_nomad):4646 && \  export NOMAD_TOKEN=$(cat nomad.token)

Finally, verify connectivity to the cluster with nomad node status

$ nomad node statusID        Node Pool  DC   Name              Class   Drain  Eligibility  Status06320436  default    dc1  ip-172-31-18-200  <none>  false  eligible     ready6f5076b1  default    dc1  ip-172-31-16-246  <none>  false  eligible     ready5fc1e22c  default    dc1  ip-172-31-17-43   <none>  false  eligible     ready

Navigate to the Nomad UI in your web browser with the URL in the post-setup.sh script output. Click on Sign In in the top right corner and log in with the bootstrap token saved in the NOMAD_TOKEN environment variable. Set the Secret ID to the token's value and click Sign in with secret.

Click on the Clients page from the sidebar navigation to explore the UI.

Cleanup

Destroy infrastructure

Use terraform destroy to remove the provisioned infrastructure. Respond yes to the prompt to confirm removal.

$ terraform destroy -var-file=variables.hcl# ...google_compute_instance.server[1]: Destruction complete after 51sgoogle_compute_instance.client[2]: Destruction complete after 51sgoogle_compute_instance.server[2]: Destruction complete after 51sgoogle_compute_instance.client[1]: Destruction complete after 51sgoogle_compute_instance.server[0]: Destruction complete after 51sgoogle_compute_instance.client[0]: Destruction complete after 51sgoogle_compute_network.hashistack: Destruction complete after 52sDestroy complete! Resources: 11 destroyed.

Delete the GCE image

Your GCP account still has the virtual machine image, which you may be charged for. Delete the image by running the gcp compute images delete command. In this example, the image name is hashistack-20221121163551.

$ gcloud compute images delete hashistack-20221121163551  The following images will be deleted: - [hashistack-20221121163551]Do you want to continue (Y/n)?  yDeleted [https://www.googleapis.com/compute/v1/projects/hc-3ff63253e6a54756b207e4d4727/global/images/hashistack-20221121163551].

Next steps

In this tutorial you created a Nomad cluster on GCP with Consul and ACLs enabled. From here, you may want to:

• Run a job with a Nomad spec file or with Nomad Pack
• Test out native service discovery in Nomad

For more information, check out the following resources.

• Learn more about managing your Nomad cluster
• Read more about the ACL stanza and using ACLs